 |
| 工业润滑油容量 | 货号 | 价格 |
|---|---|---|
| 208升（L） | G5982A9B853D26-1 | ￥0.00 |
Vacmul EDM fluids are multipurpose dielectric fluids for use in all discharge
machines working by penetration especially for roughing, finishing and
superfinishing work. Vacmul EDM is very pure fluid designed for maximum machine
productivity and operator comfort when used in electrical-discharge machining,
also called spark-erosion machining. In this metalworking process metal is
removed from a workpiece by applying a potential difference between the
workpiece and a shaped electrode. Vacmul EDM has the ability to provide uniform
insulation and then to permit controlled electrical discharge at the breakdown
voltage.
Vacmul EDM has the correct balance of viscosity, volatility,
oxidation stability, heat transfer characteristics, low odour and low toxicity.
Vacmul EDM is a highly refined, narrow-cut, low viscosity fluid specially suited
to finishing operations where a high quality finish is required. It functions as
an insulator between tool and workpiece, spark conductor, coolant and as a
flushing oil for chip removal. Vacmul EDM is recommended for roughing operations
where a high metal removal rate is required and for finishing and superfinishing
work.
| Features | Advantages and Potential Benefits |
|---|---|
| High flash point | Limits fire risk |
| Excellent filterability through cartridge and earth | Increased production |
| High wetability | Ensures liquid / metal contact and fewer rejects |
| Bright, clean and odourless. | Easy viewing of work piece and fixtures |
| Low skin sensitivity in normal use | Easy handling and improved workshop environment |
| Non fatty compared to more viscous fluids. | Higher metal removal rate and stable electrical discharge |
| Good detergency with respect to small particles. | Provides uniform insulation, higher precision and surface finish |
| Vacmul EDM | 2 | 3 |
|---|---|---|
| Density @ 15°C, kg/l ASTM D1298 | 0.791 | 0.799 |
| Colour, Saybolt | +30 | +30 |
| Viscosity cSt at 40°C mm2/s ASTM D445 | 1.61 | 2.37 |
| Flash Point, (P.M.) °C | 83 | 108 |
| IBP °C | 207 | 243 |
| FBP °C | 227 | 272 |
| Appearance | Clean and Bright | Clear and Bright |
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
The Mobil logotype, the Pegasus design, and Vamul are trademarks of Exxon Mobil Corporation, or one of its subsidiaries.
© 2001-2011 Exxon Mobil Corporation. All rights reserved..
